| TOOL |
COST |
FITTING
CHARGE |
| 1.
KNOB-HANDLED PISTOL TURNSCREWS:
Range of blade sizes covers most screws
found on pistols and revolvers.
Ebony knob handle matches dust mop
and pistol cleaning rod. Blade
widths: 1/8", 5/32", 3/16",
7/32", 1/4". |
$150.00
each |
$65.00 |
| 2.
LONDON PATTERN SHOTGUN AND RIFLE TURNSCREWS:
Heavy milled and hollow-ground blade
with finely knurled "spin-out" band
on shaft. Blade widths fit most
narrow shotgun screw slots and a thicker
blade is available for most rifle
action screws. Blade widths:
1/8", 3/16", 1/4", 5/16", 3/8" |
200.00
each |
65.00 |
| 3.
DUST MOP:
One of the handiest tools in a case
or on the workbench. Natural
bristles grip tiny dust particles
and pull them away from under ribs
and in cracks and crevices around
triggers, sights, etc. |
85.00 |
65.00 |
| 4
& 5. SHOTGUN CHAMBER BRUSHES:
Phosphor-bronze brush thoroughly cleans
the shotgun chamber and throat of
lead and plastic fouling. Brass
cap covers oily brush and protects
case lining and clothing. Available
in 12/16 and 20/28 gauge. |
150.00
each |
65.00 |
| 6. RIFLE
CLEANING ROD:
.30 caliber. 3-piece with London pattern
ebony handle. Uses U.S. standard (8-32)
cleaning tips in any caliber from
.280 through .600. Polished brass
rod rotates on a Teflon lubricated
ball bearing. Normally
fitted into case in a special lift-out
compartment. |
135.00 |
75.00 |
| 6a.
RIFLE CLEANING ROD:
.22 caliber, (not illustrated) same
as no. 6, above. |
88.00 |
75.00 |
| 7.
BRASS SHOTGUN CLEANING ROD:
Two polished
3/8" brass rod sections. Detatchable
ebony handle doubles as a chamber
brush handle when brush and cap are
supplied. Tip is threaded to accept
U.S. standard (5/16"-27) shotgun
cleaning tips. For .410 bore guns
and larger. |
160.00 |
75.00 |
| Shotgun
cleaning rod/chamber brush combination
|
190.00 |
75.00 |
| 8.
PISTOL CLEANING ROD:
Length to order. Uses U.S. standard
(8-32) tips, any caliber, from .22
to .50. Ebony knob handle matches
pistol turnscrews and dust mop. |
78.00
|
60.00
|
| 9.
BRASS OIL BOTTLE:
2 oz. 1 1/2" dia. Finely turned
and knurled cap with oil wick and
O-ring seal. Best quality workmanship
and finish. |
|
|
| |
Brass |
65.00 |
25.00 |
| |
Nickel
plate |
90.00 |
|
| |
Gold
plate |
105.00 |
|
| 10.
SNAP-CAPS:
Brass base, ebony body, spring-loaded delrin "primer" (plunger). Best quality fit and finish. |
42.00
pair |
30.00 |
| 11.
STRIKER POT:
About the size of a 10-bore
cartridge. Convenient storage
for extra striker pins, sight beads,
tiny screws, etc. Brass or nickel-plate. |
28.00 |
25.00 |
